For Sewage and wastewater applications, with more than 30 years experience in manufacturing sewage grinder pumps, including sump pumps, effluent pumps, water pumps and mag drive fountain pumps. We have a wide range of sizes available. CLICK HERE FOR EFFLUENT SEWAGE PUMPS! 1 year Limited Warranty. Please read our warranty information.

Important tips - The Length of the horizontal pipe is also an important factor when choosing a grinder sewage pump. Every 10’ of pipe equals the same restrictions as 1’ of lift. The shut off means that is the maximum height that the grinder sewage pump will lift. So you will get "0" flow at the shut off height.

Grinder Sewage Pump

Oil-filled motor for maximum motor cooling and constant bearing lubrication
Recessed impeller reduces radial bearing loads and increases bearing life
Capacitor start/run design for assured starting, strong torque and grinding under heavy load
On-Winding current and temperature-sensitive overload
Pressed stator for precise shaft / bearing alignment, long life
Shredding ring and grinder impeller are replaceable without dismantling pump or motor
300 Series Stainless Steel fasteners

Technical Data:

DISCHARGE ................. 1-1/4” NPT,Vertical
LIQUID TEMPERATURE 120ºF(40ºC) Continuous 140ºF(40ºC) Intermittent
VOLUTE ....................... Cast Iron ASTM A-48,Class 30
MOTOR HOUSING ....... Cast Iron ASTM A-48,Class 30
SEAL PLATE .................. Cast Iron ASTM A-48,Class 30
IMPELLER .................... Cast Iron ASTM A-48,Class 30,12 Vane,Vortex with Pump-out Vanes, Dynamically Balanced,ISO G6.3
SHAFT ......................... 420 Stainless Steel
O RING ........................ Buna-N
SEAL: Design ............ Single Mechanical in Oil-Filled
Material ......... Rotating Face - Silicon Carbide
Stationary Face - Silicon Carbide
Elastomer - Buna -N
Hardware - 300 Series Stainless
CABLE ENTRY .............. 30 Ft (9.1m) Cord .
Compression Grommet-Outer Jacket Seal
Epoxy Potted – Inner Conductor Seal
Butt Connector – Inner Wire Strand
Wicking Blockage
UPPER BEARING ........ Single Row, Ball, Oil lubricated
LOWER BEARING ....... Single Row, Ball, Oil Lubricated
MOTOR ..................... Single Phase, 2 HP, 3450 RPM, 60 Hz
Dual voltage, 200 / 230 volts
Includes Overload Protec on in the Motor
Oil Filled,Class F
Capacitor Start / Capacitor Run
OPTIONAL EQUIPMENT: Cord Length, Impeller Trims

WARRANTY:
Whichever comes first:
12 months from date of original installation, or
18 months from date of manufacture

OPTIONAL: Piggy back ball float switch / 115v Only 59.95 / 230v Only 59.95

Model

Power

Voltage

Amp.

RPM.

Capacity/20ft

Max. Head

Discharge

Weight
Price

FG2-21C

2 HP

200/230V

14/5 A

3450

44 GPM

104 ft

1 1/4”

91 lbs
$795.00

FC2-21C

2 HP

200/230V

14/5 A

3450

44 GPM

108 ft

1 1/2”

91 lbs
$795.00