For Sewage and wastewater applications, with more than 30 years experience in manufacturing sewage grinder pumps, including sump pumps, effluent pumps, water pumps and mag drive fountain pumps. We have a wide range of sizes available. CLICK HERE FOR EFFLUENT SEWAGE PUMPS! 1 year Limited Warranty. Please read our warranty information.

Important tips - The Length of the horizontal pipe is also an important factor when choosing a grinder sewage pump. Every 10’ of pipe equals the same restrictions as 1’ of lift. The shut off means that is the maximum height that the grinder sewage pump will lift. So you will get "0" flow at the shut off height.

Grinder Sewage Pump

Equipped with a grinder device, this sewage pump is able to cut off the long fiber, debris, designed for discharging sewage and living waste water. ( INCLUDES FLANGE TO ATTACH TO DISCHARGE )

GRINDER SEWAGE PUMP SPECIFICATIONS:
DISCHARGE ................. 2” NPT, Vertical
LIQUID TEMPERATURE 120ºF(40ºC) Continuous
140ºF(40ºC) Intermittent
VOLUTE ....................... Cast Iron ASTM A-48,Class 30
MOTOR HOUSING ....... Cast Iron ASTM A-48,Class 30
SEAL PLATE .................. Cast Iron ASTM A-48,Class 30
IMPELLER .................... Cast Iron ASTM A-48,Class 30,12 Vane,
Vortex with Pump-out Vanes,
Dynamically Balanced,ISO G6.3
SHAFT ......................... 420 Stainless Steel
O RING ........................ Buna-N
SEAL: Design ............ Single Mechanical in Oil-Filled
Material ......... Rotating Face - Silicon Carbide
Stationary Face - Silicon Carbide
Elastomer - Buna -N
Hardware - 300 Series Stainless
CABLE ENTRY .............. 30 Ft (9.1m) Cord .
Compression Grommet-Outer Jacket Seal
Epoxy Potted – Inner Conductor Seal
Butt Connector – Inner Wire Strand
Wicking Blockage
UPPER BEARING ........ Single Row, Ball, Oil lubricated
LOWER BEARING ....... Single Row, Ball, Oil Lubricated
MOTOR ..................... Single Phase, 1.5 HP, 3450 RPM, 60 Hz
Dual voltage, 200 / 230 volts
Includes Overload Protection in the Motor
Oil Filled,Class F
Capacitor Start / Capacitor Run
OPTIONAL EQUIPMENT: Cord Length, Impeller Trims
KEY FEATURES:
• Oil-filled motor for maximum motor cooling and constant bearing lubrication
• Recessed impeller reduces radial bearing loads and increases bearing life
• Capacitor start/run design for assured starting, strong torque and grinding under heavy load
• On-Winding current and temperature-sensitive overload
• Pressed stator for precise shaft / bearing alignment, long life
• Shredding ring and grinder impeller are replaceable without dismantling pump or motor
• 300 Series Stainless Steel fasteners

WARRANTY:
Whichever comes first:
12 months from date of original installation, or
18 months from date of manufacture

OPTIONAL: Piggy back ball float switch / 115v Only 59.95 / 230v Only 59.95

Model	Power	Voltage	Amp.	RPM.	Capacity/5ft	Max. Head	Discharge	Weight	Price
WQ1.1QG	1.5 HP	115v	17.6	3450	110 GPM	50ft.	2"	71 lbs	$495.00
WQ1.1QG	1.5 HP	230V	8.8	3450	180 GPM	50 ft	2”	71 lbs	$495.00